This was the first day’s shooting with my new Panasonic lens for my Olympus OMD-EM10 and I was excited by it. Also the first time I’ve been able to try using my Lee neutral density graduated filters with the Olympus and I was interested to see how that would work ( here’s how it worked) .
The weather turned out fantastically well and I went back to my current-favourite place – Holme Fell again. I hope you’re not bored with shots of the Langdale Pikes and Fairfield.
The sunset was glorious, though lacking any clouds to add drama, but the larch trees were lit up in flame. After the sun had gone I kept shooting to get some of the lovely mauve colours on the landscape.
I’m impressed by the quality of the new lens. Better than my Pentax, more consistent than the old Olympus lens I had on the OMD. Not bad for £80. I also took some shots with the Pentax, which have quite a different look to them though whether you’ll notice is doubtful.
I wrote about my new lens a couple of posts ago. One very useful side-effect is that it has a 52mm filter thread which just happens to be one of the sizes I have of Lee filter system adapters. This means I can finally use my Lee filters on my Olympus OMD-EM10, especially my neutral density graduated filters. Ever since buying the Olympus with the kit pancake lens, which had an absurdly small 37mm filter thread, the fact that I couldn’t use the ND grad filters on that lens was the main reason I carried on using my Pentax. No longer. I went out yesterday and shot for the first time with the new lens and using ND graduated filters on the Olympus.
It didn’t work quite the way I thought it would. On an SLR you look through the viewfinder and use the depth of field preview feature to stop the aperture down so you can line up the filter and get the light/dark transition in just the right place.
I tried this on the Olympus. Out of the box it doesn’t have a dedicated DoF preview button but using the ability to assign functions to buttons I have assigned DoF preview to the video button (red button on right of top plate). However, as soon as you slide the filter down to line it up while stopping the lens down, the display (which of course is an electronic live view) compensates for the effect of the filter and brightens the scene.
What I found instead to be more useful and practical is to set the display to show red flashing on any over-exposed areas. Then slide the filter down until all the red flashing areas (presumably in the sky) disappear. Then you can increase the exposure (shutter speed or aperture) until just before the red flashes reappear.
This may actually be more accurate than it is on a normal DSLR with optical viewfinder. It certainly seemed to work well yesterday.
This is likely to push my Pentax right to the bottom of my bag and I expect nearly all shots from now on will be Olympus shots.
My camera equipment is always on the leading edge of the technology curve – I’ve just bought a second hand Panasonic 14-45 mm zoom lens, a ten year old design, for my battered old Olympus OMD-EM10. Continue reading →